Maintenance and inspection of wire rope slings
(1) run
The speed of the steel wire rope should be stable during operation, and it should not exceed the load to avoid impact load.
(2) Maintenance
The wire rope has been coated with enough grease during manufacture, but after running, the grease will gradually decrease, and the surface of the wire rope will occupy dirt such as dust and debris, which will cause wear and tear of the wire rope and sheave and rust of the wire rope. Clean and oil. The simple method is to use a wire brush and other corresponding tools to wipe off the dust and other dirt on the surface of the wire rope, apply the heated and melted wire rope surface grease evenly on the surface of the wire rope, or spray No. 30 or No. 40 engine oil on the surface of the wire rope , but do not spray too much and pollute the environment.
(3) Inspection records of wire rope slings
The use of wire rope slings must be regularly checked and recorded. In addition to the above-mentioned cleaning and refueling, the content of regular inspections should also check the degree of wear, broken wires, corrosion of the wire rope, hooks, rings, lubricating wheel grooves, etc. Condition of wear of consumable parts. Any abnormality must be adjusted or replaced in time.
