Search
G80 Accessories
Lifting accessories are crucial for ensuring the safety and efficiency of lifting operations in industrial and construction environments. They should be selected based on the specific load requirements, and their use should always comply with relevant safety regulations and standards.
1.02.07
•Material: High strength and high toughness alloy steel
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•100% Eddy current inspection for flaw detection of the pin
•The G80 connecting link is suitable for EN818-2 G80 chain
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•100% Eddy current inspection for flaw detection of the pin
•The G80 connecting link is suitable for EN818-2 G80 chain
1.02.01
•Material: Forged supper alloy steel
•100% tested at 2 times of working load limit
•100% MPI for crack detection
•Each batch of products shall be sampled for breaking load test
•For chain sling：Minimum breaking load is 4 times of WLL
•For wire rope sling：Minimum breaking load is 5 times of WLL
•100% tested at 2 times of working load limit
•100% MPI for crack detection
•Each batch of products shall be sampled for breaking load test
•For chain sling：Minimum breaking load is 4 times of WLL
•For wire rope sling：Minimum breaking load is 5 times of WLL
1.02.02
•Production and testing standard: according to EN1677-4
•Material: welded supper alloy steel
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue tested at 1.5 times of WLLt for 20000 cycles for samples of each batch
•The minimum breaking load is 4 times of WLL, the WLL is based on two legs G80 chain sling with sling angle from 0-45°
The master link is suitable for 1 or 2 legs G80 chain sling as per EN818-4, and there will be pressing flat only on request. The pressing flat is designed for the connecting with G80 Omega link. For use of wire rope sling, refer to DIN3088 standard, and for use with synthetic sling, refer to EN1492-1 standard.
•Material: welded supper alloy steel
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue tested at 1.5 times of WLLt for 20000 cycles for samples of each batch
•The minimum breaking load is 4 times of WLL, the WLL is based on two legs G80 chain sling with sling angle from 0-45°
The master link is suitable for 1 or 2 legs G80 chain sling as per EN818-4, and there will be pressing flat only on request. The pressing flat is designed for the connecting with G80 Omega link. For use of wire rope sling, refer to DIN3088 standard, and for use with synthetic sling, refer to EN1492-1 standard.
1.02.03
•Material: High strength and high toughness alloy steel
•100% tested at 2 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•For chain sling：Minimum breaking load is 4 times of WLL
•For wire rope sling：Minimum breaking load is 5 times of WLL
•100% tested at 2 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•For chain sling：Minimum breaking load is 4 times of WLL
•For wire rope sling：Minimum breaking load is 5 times of WLL
1.02.04
•Material: Forged supper alloy steel
•100% tested at 2 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•For chain sling：Minimum breaking load is 4 times of WLL
•For wire rope sling：Minimum breaking load is 5 times of WLL
•The pressing flat is designed for the connecting with G80 Omega link,and there will be pressing flat only on request.
•100% tested at 2 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•For chain sling：Minimum breaking load is 4 times of WLL
•For wire rope sling：Minimum breaking load is 5 times of WLL
•The pressing flat is designed for the connecting with G80 Omega link,and there will be pressing flat only on request.
1.02.05
•Production and testing standard: according to EN1677-4
•Material: High strength and high toughness alloy steel
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue tested at 1.5 times of WLL for 20000 cycles for samples of each batch
•The minimum breaking load is 4 times of WLL, the WLL is based on 3 or 4 legs G80 chain sling with sling angle from 0-45°
The master link is suitable for 3 or 4 legs G80 chain sling as per EN818-4, and there will be pressing flat only on request. The pressing flat is designed for the connecting with G80 Omega link. For use of wire rope sling, refer to DIN3088 standard, and for use with synthetic sling, refer to EN1492-1 standard.
•Material: High strength and high toughness alloy steel
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue tested at 1.5 times of WLL for 20000 cycles for samples of each batch
•The minimum breaking load is 4 times of WLL, the WLL is based on 3 or 4 legs G80 chain sling with sling angle from 0-45°
The master link is suitable for 3 or 4 legs G80 chain sling as per EN818-4, and there will be pressing flat only on request. The pressing flat is designed for the connecting with G80 Omega link. For use of wire rope sling, refer to DIN3088 standard, and for use with synthetic sling, refer to EN1492-1 standard.
1.02.06
•Material: supper alloy steel
•100% tested at 2 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•For chain sling：Minimum breaking load is 4 times of WLL
•For wire rope sling：Minimum breaking load is 5 times of WLL
•The pressing flat is designed for the connecting with G80 Omega link,and there will be pressing flat only on request.
•100% tested at 2 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•For chain sling：Minimum breaking load is 4 times of WLL
•For wire rope sling：Minimum breaking load is 5 times of WLL
•The pressing flat is designed for the connecting with G80 Omega link,and there will be pressing flat only on request.
1.02.08
•Material: High strength and high toughness alloy steel
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•100% Eddy current inspection for flaw detection of the pin
•The G80 webbing connecting link is suitable for EN1492-2 web sling and EN818-2 G80 chain
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•100% Eddy current inspection for flaw detection of the pin
•The G80 webbing connecting link is suitable for EN1492-2 web sling and EN818-2 G80 chain
1.02.09
•Material: High strength and high toughness alloy steel
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•100% Eddy current inspection for flaw detection of the pin
•The G80 Omega link is suitable for EN1492-2 web sling and EN818-2 G80 chain
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•100% Eddy current inspection for flaw detection of the pin
•The G80 Omega link is suitable for EN1492-2 web sling and EN818-2 G80 chain
1.02.26
•Material: High strength and high toughness alloy steel
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Welding must be performed by qualified welder
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Welding must be performed by qualified welder
1.02.11
•Material: High strength and high toughness alloy steel
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•100% Eddy current inspection for flaw detection of the pin
•The G80 Clevis Sling Hook with Latch is suitable for EN818-2 G80 chain
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•100% Eddy current inspection for flaw detection of the pin
•The G80 Clevis Sling Hook with Latch is suitable for EN818-2 G80 chain
1.02.10
•Material: High strength and high toughness alloy steel
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•The G80 Eye sling hook with latch is suitable for EN818-2 G80 chain
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•The G80 Eye sling hook with latch is suitable for EN818-2 G80 chain
1.02.13
•Material: High strength and high toughness alloy steel
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•The G80 Swivel Hook with Latch is suitable for EN818-2 G80 chain
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•The G80 Swivel Hook with Latch is suitable for EN818-2 G80 chain
1.02.14
•Material: High strength and high toughness alloy steel
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•100% Eddy current inspection for flaw detection of the pin
•The G80 Clevis Self-locking Hook is suitable for EN818-2 G80 chain
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•100% Eddy current inspection for flaw detection of the pin
•The G80 Clevis Self-locking Hook is suitable for EN818-2 G80 chain
1.02.16
•Material: High strength and high toughness alloy steel
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•The G80 Eye shortening grab hook is suitable for EN818-2 G80 chain
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•The G80 Eye shortening grab hook is suitable for EN818-2 G80 chain
1.02.17
•Material: High strength and high toughness alloy steel
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•100% Eddy current inspection for flaw detection of the pin
•The G80 Clevis shortening grab hook is suitable for EN818-2 G80 chain
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•100% Eddy current inspection for flaw detection of the pin
•The G80 Clevis shortening grab hook is suitable for EN818-2 G80 chain
1.02.12
•Material: High strength and high toughness alloy steel
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•The G80 Swivel Hook with Latch is suitable for EN818-2 G80 chain
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•The G80 Swivel Hook with Latch is suitable for EN818-2 G80 chain
1.02.15
•Material: High strength and high toughness alloy steel
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•The G80 Swivel Self-locking Hook is suitable for EN818-2 G80 chain
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•The G80 Swivel Self-locking Hook is suitable for EN818-2 G80 chain
1.02.18
•Material: High strength and high toughness alloy steel
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•The G80 eye foundry hook is suitable for EN818-2 G80 chain
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•The G80 eye foundry hook is suitable for EN818-2 G80 chain
1.02.24
•Material: High strength and high toughness alloy steel
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•The G80 container hook is suitable for EN818-2 G80 chain
•100% tested at 2.5 times of working load limit
•100% MPI for crack detection
•Breaking load test for samples of each batch
•Fatigue test at 1.5 times of Working Load Limit for 20000 cycles for samples of each batch
•The G80 container hook is suitable for EN818-2 G80 chain
- 1
- 2