Products tagged with 'Chain'

* designed and manufactured according to the European standard EN 818
* made of alloy steel with specific mechanical properties to ensure strength and durability
* safety factor: 4:1
* Test certificates available upon request

•Confirm to EN818-2 standard, Grade 80
•Material: high quality alloy containing Cr, Ni and Mo
•Surface treatment:black, galvanized, painted
•Safety Factor: MIN 4 times
•Test certificates available upon request.

Typically, the lashing chains are short link types. There are specific hooks or rings at both ends, which can be fixed on the vehicle or connected to the goods in the case of direct binding.
The chain is equipped with tensioning device. It can be a fixed part of the chain or a separate device fixed along the chain to tension it. There are different versions of tensioning systems, such as ratchet type and turnbuckle type. In order to comply with EN 12195-3, there must be equipment that can prevent loosening during transportation. In fact, this will undermine the effectiveness of fixation. The rear tensioning clearance must also be limited to 150 mm to avoid the possibility of load movement, resulting in loss of tension due to settlement or vibration.

•Material: High alloy steel(DIN17115)
•Surface treatment: Black Painting or Anti-rust oil coating
•Breaking elongation: 12% max
•Marked with Chain size, product ID, grade with manufacture quality mark.
•Test certificates available upon request.
The dimensions and properties of the mining chains completely conform to grade B or C requirements specified in the National standard GB/T 12718 and DIN22252-1/2 standard.
The mining chain can adjust the length of the chain according to the different lifting objects. It is an essential and important lifting device of the crane. It plays an important role in improving the operation efficiency and expanding the operation range of the crane.

•Confirm to USA standard, Grade 80
•Material: high quality alloy steel
•Safety Factor: 4 times
•Test certificates available upon request.

*G80 hoist chain is made from high-strength alloy steel, providing excellent tensile strength and durability.
*Test certificates available upon request.
*Surface Treatment:galvanized.